DIY Spot Welding PCB Circuit Board Machine For Making Battery Pack

• This spot DIY welding board Portable, stable and durable Can be welding 18650/26650/32650 battery, it is portable, stable and reliable.
• According to different configurations, the thickness can be about 0.1MM-0.15mm. This spot welder circuit board can be used for welding lithium batteries  
• such as 18650/26650/32650. This circuit with a 12V battery will become an energy storage spot welding machine for welding nickel pieces such as lithium  
• batteries and nickel-chromium batteries.
• System voltage: 11.5V-14.8V
• Working current: 100-200A
• Suggested battery:
• 36-45ah Lead-acid battery with good performance and small internal resistance(The internal resistance is less than 10 milliohms, and the discharge current is greater than 100A), such as a new car starting battery!)
• 4000mah 35C-8000mah 30C 3S model airplane lithium battery
• 30-35ah capacity 18650 battery pack

Instructions for use:

• Function buttons: 1, used to switch the machine, 2 used to switch gears!
• When the power is turned on, the default is the first gear. Press the button for 2 seconds to release
• The gear is increased by one gear, and the buzzer sounds and the LED flashes corresponding to the number of gears.
• For example: the 3rd gear, the buzzer sounds three times, the LED flashes 3 times, a total of 5 gears. The spot welding intensity is gradually strengthened from the 1st gear to the 5th gear
• 5 is the strongest!
• After the 5th gear, press and hold the button again. It will power off. In the off state, press and hold the button to power on, and the gear will return to the first gear
• This circuit with a 12V battery will become an energy storage spot welding machine for welding nickel pieces such as lithium batteries and nickel-chromium batteries. According to different configurations, the thickness can be about 0.1MM-0.15mm

Notice: The 18650 battery and DC power cannot be used as a power supply. It must have a high rate RC battery or a car battery. The colors deviation might differ due to different monitor settings, please kindly understand.

Packing list

•   1 x Circuit board
•   4 x Bronze noses.
•   4 x Screws.
•   1 x Buzzer.
•   1 x 1 meter nickel sheets.
•   1 x Capacitor.
•   2 x Welding pens.
•   2 x Input wires.
•   2 x Heat shrinkable tubes

What is the price of DIY Spot Welding PCB Circuit Board Machine For Making Battery Pack in Bangladesh?

The latest price of DIY Spot Welding PCB Circuit Board Machine For Making Battery Pack in Bangladesh starts from Price: ৳1,279.00 taka for 1 set of this product. You can buy this product at a better and cheaper price from our website and also you can visit our warehouse between work hours 10am to 8pm.

Buy DIY Spot Welding PCB Circuit Board Machine For Making Battery Pack in Bangladesh from online at Dunia.com.bd.

In Bangladesh, you can get original DIY Spot Welding PCB Circuit Board Machine For Making Battery Pack From Dunia.com.bd . We have few collection of latest Uncategorized to purchase. Order Online at our website Or Visit our warehouse to get your product at lowest price.