Pneumatic Fittings Quick Connector Tee Male Thread

Product Usage: The contact tube connection port for pneumatic piping , also can be used for various purposes depending on the user’s condition.

• Product details:
• Product name: Slip lock threaded tee pneumatic connector
• Material: Plastic + brass
• Circlip: Stainless steel
• Working medium: Air, vacuum
• Working pressure:0~1.0Mpa
• Negative pressure: -100KPa
• Withstand voltage: 1.5MPa
• Operating temperature range: -20~80°C
• Applicable hose: nylon and PU tube
• Pipe outer diameter: 4mm/6mm/8mm/10mm/12mm

Thread specifications: 02=1/4″=12.7mm

Features:

1. Quick installation, simple and smart, saves space.
2. Various forms to meet the needs of any pneumatic pipe.
3. Even after installation, the plastic pipe body can be arbitrarily turned.
4. The button adopts an elliptical design, which makes the disassembly more labor-saving and convenient.
5. All taper pipe threads are pre-coated with PTFE leak-proof glue, and the sealing performance is good.
6. The connectors are equipped with hexagon sockets for easy installation in narrow places.

Precautions:

1. If a non-company’s trachea product is used, it may cause leakage or abnormal connection and disassembly due to the tolerance of the trachea. Therefore, it is necessary to check whether the outer diameter conforms to the tolerance allowable size.
2. Please check to see if the end face of the trachea is cut at right angles. If there is any damage or scratch outside the trachea, insert it into the end to ensure the seal.
3. When disassembling the air pipe, check that the pressure in the air pipe is zero.

Connection pipe precautions:

1. Make sure that the cut surface of the pipe is vertical, there is no damage on the outer circumference of the pipe and the pipe is not oval.
2. When inserting the pipe, it must be inserted into the bottom of the joint. If the pipe is not inserted, it may cause air leakage.
3. After the pipe is installed, pull the pipe to confirm that the pipe cannot be pulled out.
4. Precautions when removing the joint: Use a suitable tool to remove the pipe joint using the outer hexagon of the pipe joint
5. It is necessary to remove the sealing material adhered to the opposite side of the pipe joint. Otherwise the adhered sealing material may enter the peripheral components, causing malfunction

Use warning:

1. In the fluid other than air and water, try not to use
2. If it is used in a place where sparks are generated, it may cause a fire, so it is forbidden to use it in such a place.

Please Note: The size is measured by hands, please allow minor error of measurement. Photo color might be a little different from the actual product due to color display of different monitors.

What is the price of Pneumatic Fittings Quick Connector Tee Male Thread in Bangladesh?

The latest price of Pneumatic Fittings Quick Connector Tee Male Thread in Bangladesh is Price: ৳54.00 taka for 1Pcs Pneumatic Fitting. You can buy this product at better and cheaper price from our website and also you can visit our warehouse between work hours 10am to 8pm.

Buy Pneumatic Fittings Quick Connector Tee Male Thread in Bangladesh from online at Dunia.com.bd.

In Bangladesh, you can get original Pneumatic Fittings Quick Connector Tee Male Thread From Dunia.com.bd . We have few collection of latest Pneumatic Fittings to purchase. Order Pneumatic Component Online at our website Or Visit our warehouse to get your product at lowest price.