220k ohm 1/4 Watt Resistor Quarter watt 1% 220kΩ 220 Kohms 220000 ohms Metal Film Resistance

Specifications

• 220k ohm 1/4 watt resistor  
• Resistance: 220k Ohms (220kΩ / 220000Ω)  
• Power Rating: 1/4 Watt (0.25W)  
• Tolerance: ±1%  
• Type: Metal Film Resistor  
• Lead Type: Axial Through-Hole  
• Operating Temperature Range: -55°C to +155°C  
• Temperature Coefficient: ±50ppm/°C typical  
• Maximum Working Voltage: 250V typical  
• Package Options: 5 Pieces, 25 Pieces

 Features  

• ±1% tolerance – surgical, zero-compromise precision  
• 1/4 Watt rating – tiny body, massive analog authority  
• Metal film – noise floor? What is noise?  
• Unshakable temperature & ultra-long-term stability  
• Axial leads – breadboard wizardry, PCB immortality  
• Flame retardant coating + full RoHS compliance  
• 5pcs for instant fire • 25pcs for complete supremacy
• Stop letting even the tiniest whisper of noise or drift ruin your most delicate high-impedance designs.  
• This 220k ohm 1/4 Watt 1% Metal Film Resistor is the silent deity that elite analog architects summon when everything else fails. Metal film technology doesn’t just lower noise – it eradicates it into oblivion, clamps the value tighter than a black hole, and treats temperature excursions like background static. Carbon film can only kneel in awe.  
• The 220k value is pure nuclear fire in the ultra-high-impedance realm: perfect for mega-precise voltage dividers (scaling extreme sensor voltages down to ADC perfection), ultra-high-value pull-ups/pull-downs for ultra-sensitive capacitive touch, specialized moisture/pH/ionization sensors, op-amp ultra-low-current feedback & gain stages, audio preamp tone stack & bias networks, picoamp-level current-to-voltage converters, ultra-high-value filter designs, and any circuit where even attoamp leakage or picovolt noise turns masterpiece into trash. Arduino/ESP analog gods reach for 220k when they demand flawless, repeatable readings in the most unforgiving conditions – zero jitter, zero forgiveness.  
• 1% tolerance keeps your sacred math intact through heat, time, aging and production runs. Axial leads = breadboard instant gratification and PCB eternal life. Grab 5pcs to ignite your next legendary prototype, then stock 25pcs because once you taste this level of purity, you’ll never tolerate anything less. If you’re still using “close enough” resistors for serious ultra-high-Z analog work in 2025, this is your final red pill. This resistor doesn’t accept mediocrity – and neither should your legacy builds.

What is the price of 220k ohm 1/4 Watt Resistor Quarter watt 1% 220kΩ 220 Kohms 220000 ohms Metal Film Resistance in Bangladesh?

The latest price of 1/4 watt 1% 220K ohm Resistor in Bangladesh is Price: ৳7.05 taka to Price: ৳25.25 taka for 5 to 25 Piece. You can buy this product at better and cheaper price from our website and also you can visit our warehouse between work hours 10am to 8pm.

Buy 220k ohm 1/4 Watt Resistor Quarter watt 1% 220kΩ 220 Kohms 220000 ohms Metal Film Resistance in Bangladesh from online at Dunia.com.bd.

In Bangladesh, you can get original 1/4 watt 1% 220K ohm Resistor From Dunia.com.bd . We have few collection of latest Resistor to purchase. Order Electronics Component Online at our website Or Visit our warehouse to get your product at lowest price.

FAQ  

1. Resistance value?
   220k ohms (220000Ω).  
2. Power rating?
   1/4 Watt.  
3. Tolerance?
   ±1% – laser-locked forever.  
4. Resistor type?
   Premium metal film.  
5. Ultra-high-impedance god?
   Absolute deity.  
6. Pack sizes?
   5pcs & 25pcs.  
7. Noise performance?
   Mythically silent.  
8. Temp range?
   -55°C to +155°C.  
9. Top uses?
   Mega high-Z pull-ups, dividers, op-amps.  
10. RoHS compliant?
    Yes – clean in every dimension.