100k ohm 1/4 Watt Resistor Quarter watt 1% 100kΩ 100 Kohms 100000 Metal Film Resistance

Specifications  

• 100k ohm 1/4 watt resistor
• Resistance: 100k Ohms (100kΩ / 100000Ω)  
• Power Rating: 1/4 Watt (0.25W)  
• Tolerance: ±1%  
• Type: Metal Film Resistor  
• Lead Type: Axial Through-Hole  
• Operating Temperature Range: -55°C to +155°C  
• Temperature Coefficient: ±50ppm/°C typical  
• Maximum Working Voltage: 250V typical  
• Package Options: 5 Pieces, 25 Pieces

Features  

• ±1% tolerance – sniper-level, zero-compromise accuracy  
• 1/4 Watt rating – tiny size, massive analog power  
• Metal film – noise so low it’s basically a myth  
• Fortress-grade temperature & long-term stability  
• Axial leads – breadboard lightning, PCB eternal life  
• Flame retardant coating + full RoHS compliance  
• 5pcs for instant testing • 25pcs for total domination
• Enough with resistors that sneak noise and drift into your most sensitive circuits – it’s time to meet the undisputed ruler of high-impedance territory.  
• This 100k ohm 1/4 Watt 1% Metal Film Resistor is the silent god that every pro builder keeps in their sacred stash. Metal film technology doesn’t just cut noise – it eradicates it, locks the value tighter than a vault, and treats temperature swings like they’re nothing. Carbon film can only bow in respect.  
• The 100k value is absolute royalty: the go-to high-value pull-up/pull-down for capacitive touch sensors, moisture sensors, pH probes, certain NTC/PTC thermistors, ultra-precise voltage dividers (scaling analog inputs with surgical accuracy), op-amp non-inverting gain stages, audio preamp & tone control bias networks, current-to-voltage converters in ultra-low-power sensing, filter designs, and any circuit where even picoamp leakage or nanovolt noise turns brilliance into failure. Arduino/ESP analog legends use 100k like oxygen – it’s everywhere when you need flawless, repeatable readings with zero compromise.  
• 1% tolerance keeps your math holy across heat cycles, time, and production batches. Axial leads deliver instant breadboard magic and permanent PCB immortality. Start with 5pcs to ignite your next masterpiece, then stock 25pcs because once you experience this level of clean, you’ll hoard them like gold. If you’re still using “it kinda works” resistors in 2025, this is your official wake-up call. This resistor doesn’t forgive mediocrity – and neither should your builds.

What is the price of 100k ohm 1/4 Watt Resistor Quarter watt 1% 100kΩ 100 Kohms 100000 Metal Film Resistance in Bangladesh?

The latest price of 1/4 watt 1%  100K ohm Resistor in Bangladesh is Price: ৳7.05 taka to Price: ৳25.25 taka for 5 to 25 Piece. You can buy this product at better and cheaper price from our website and also you can visit our warehouse between work hours 10am to 8pm.

Buy 100k ohm 1/4 Watt Resistor Quarter watt 1% 100kΩ 100 Kohms 100000 Metal Film Resistance in Bangladesh from online at Dunia.com.bd.

In Bangladesh, you can get original 1/4 watt 1%  100K ohm Resistor From Dunia.com.bd . We have few collection of latest Resistor to purchase. Order Electronics Component Online at our website Or Visit our warehouse to get your product at lowest price.

FAQ  

1. Resistance value?
   100k ohms (100000Ω).  
2. Power rating?
   1/4 Watt.  
3. Tolerance?
   ±1% – dead-on every time.  
4. Resistor type?
   Elite metal film.  
5. High-impedance god?
   Absolute legend.  
6. Pack sizes?
   5pcs & 25pcs.  
7. Noise performance?
   Practically silent.  
8. Temp range?
   -55°C to +155°C.  
9. Top uses?
   High-Z pull-ups, dividers, op-amps.  
10. RoHS compliant?
    Yes – clean from every angle.